Screenshots
About BLExAR
BLExAR turns your iPhone or iPad into a pocket bench instrument for Arduino-class boards over Bluetooth Low Energy. Connect to a board with an HM-10 style UART module (CC2541, AT-09, JDY-08, SH-M08), an nRF52840 MakerBLE board or a Seeed XIAO ESP32-C6, then switch pins, stream sensor values, plot and record them, all without writing an app of your own.
BLExAR 3.0 is a complete rewrite that keeps working with the sketches and tutorials written for earlier versions: the same commands, the same pins and the same CSV files.
CONTROL
• Switch digital pins and set PWM from pin tiles laid out like your board's header
• Analog sliders for the A-pins
• Board profiles for Arduino Uno, Arduino Nano, MakerBLE (nRF52840), Seeed XIAO ESP32-C6 and the classic 2.7 layout
• TX/RX activity lights show every message to and from the board
DATA
• Live chart of the comma-separated values your board sends, with Run/Hold and 10 s, 1 min and 10 min windows
• Readout cards with min, max and standard deviation for each series, plus the incoming stream rate
• Record sessions to CSV, optionally with your location on each row, and keep recording in the background
• Browse, reopen and share recorded sessions; they also appear in the Files app
CONSOLE
• Serial terminal to send and receive text, with a hex view and quick command keys
PANELS
• Build your own control dashboards with buttons, toggles, sliders, a joystick and gauges bound to your board's commands and data columns
• Share panels with others as files
ALWAYS AT HAND
• Live Activity on the Lock Screen and in the Dynamic Island while connected or recording
• Control Center controls to toggle a pin without opening the app
• Scan list puts UART-ready boards first, ordered by signal strength
• Automatic reconnect after a dropped link
• Light and dark appearance and Dynamic Type
BLExAR is made for makers, students, teachers and engineers. Tutorials and example sketches are at makersportal.com.
AVALW Coverage
Not yet mentioned in AVALW articles.