Screenshots
About StylusLog - Vinyl to Digital
StylusLog turns your records into digital albums on your iPhone. Connect a USB turntable, a USB phono preamp or a DJ mixer's phono channel, play a side, and get it back as tracks: trimmed, split, tagged from Discogs and saved as FLAC, with a report on how the record and your setup sound.
StylusLog records the digital audio your turntable or preamp sends over USB, the same stream a computer would get, at the device's own sample rate. It never records from the iPhone's microphone.
WHAT YOU NEED
• An iPhone with USB-C, or a Lightning iPhone with Apple's Lightning to USB 3 Camera Adapter
• A turntable with a USB output, or a phono preamp with USB, or a DJ mixer with USB audio and a phono input
• A plain record player without USB needs a USB phono preamp in between
• Some devices powered over USB need more power than an iPhone supplies. A powered USB hub fixes that.
HOW IT WORKS
1. Pick the record: search Discogs or paste a release link. The tracks on each side come with it. No Discogs account needed. Not on Discogs? Skip tagging and name it later.
2. Set the level: play the loudest part and watch the meters.
3. Record a side: StylusLog sees the needle drop and the end of the side, stops by itself, and asks you to flip.
4. Review: the start, the end and the gaps between tracks are found from the audio, guided by the Discogs track times. Listen across any cut, nudge it, add or remove a split.
5. Export: tagged files in an album folder, ready for any music app.
EXPORT
• FLAC (lossless) with artist, album, title, track number, year, label and the cover embedded
• WAV, or a smaller M4A (AAC) copy
• Saved in the Files app, under On My iPhone › StylusLog › Artist - Album (Year)
• Share any file to another app
QUALITY REPORT
After each side, a plain-language report on the record and the setup:
• A suggested play grade, from the clicks and the groove noise (audio only, so a suggestion, not a grade)
• Clicks per minute, with the loudest ones listed: tap one to hear it
• Surface noise and signal-to-noise
• Hum from a missing ground wire, and rumble from the motor or a warp
• Level and clipping, channel balance, phase and mono
• "No phono preamp?" when a turntable is plugged into a line input
RESTORATION
• Declick: repairs the clicks the report found
• Hum filter and subsonic (rumble) filter
• Hear before and after; the raw recording is never changed
STYLUS HOURS
Every side you record counts toward your stylus. Set the model and its expected life, and StylusLog shows the wear and tells you when it's due.
HARDWARE
StylusLog records from class-compliant USB audio, the standard most USB turntables, USB phono preamps, DJ mixers and audio interfaces use. A device that works on a computer without installing a driver is the best fit.
Not sure about your gear? Plug it in first: StylusLog shows whether it connects, and the level meters show the record playing, before you pay anything.
Tried it on your setup? Send the diagnostic log from the menu, whether it worked or not.
FREE TO TRY, ONE-TIME UNLOCK
Your first three albums get everything. After that, the free version still records, trims and exports each side as one WAV or M4A file, shows the report's grade, and keeps counting stylus hours. A one-time Pro unlock adds automatic splits into named, tagged tracks, FLAC, the full report and restoration, for every record. No subscription, no ads.
PRIVATE BY DESIGN
No account, no ads, no trackers. Your recordings stay on your iPhone until you share them. The app goes online only to look up records on Discogs and, if you agree, to send anonymous compatibility reports: which USB device, and whether it worked. Never audio.
This application uses Discogs' API but is not affiliated with, sponsored or endorsed by Discogs. 'Discogs' is a trademark of Zink Media, LLC. StylusLog is not affiliated with any hardware maker; product names are trademarks of their respective owners.
AVALW Coverage
Not yet mentioned in AVALW articles.